HT22 Large Heat Treating Kiln (21" Deep)

Uses: Heat Treating    Industrial    Knife Making

Machine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return and then send it out again for additional heat treating.

Solid construction

**All HT kilns now come with Solid State Relay as standard**

The door swings open with one-handed operation. A counter-weight handle holds the door securely closed. The door has a vent hole, so you can see inside the furnace during firing. Metal covers seal the vent holes when not in use. (Always wear Paragon firing safety glasses when looking into a hot furnace.) The furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they’re exposed rather than embedded. You can thread new elements into place following clear instructions in the manual.

The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation and a one year warranty.

FEATURES OF THE SENTINEL TOUCH SCREEN CONTROLLER -                                 

*Touch-screen technology for the user interface
*Easy-to-follow screen descriptions
*Different user-interface levels, which can be set to match the user’s firing knowledge
*Graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating

Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English.

Optional Knifemakers Heat Treating Kit

Contains 1 pair hot gloves, 1 heat treating fork, 4 knifeholders, and 8 firebrick supports.

Hot Gloves

For intermittent handling of hot objects up to 400° F. Sold in pairs. Not intended for handling hot blades.

Heat Treating Fork

Easily removes knifeholders and blades from the hot furnace. A sliding wooden handle allows you the most comfortable position for holding the fork. 31” long.

Firebrick Supports

Position firebrick supports under the knifeholders inside the furnace. The firebrick supports raise the knifeholders so you can slide the fork under holders.

Knifeholder

High temperature removable pins fit into holes pressed into a ceramic base. The pins hold the blades on edge so heat can circulate around each blade. (You will need to wrap the blades in heat treating foil, which is not included in this kit.) Shipping dimensions: 24" x 24" x 9"

Optional Gas Injection Flow Meter

During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil, which Paragon sells. An easier way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.

The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.

Specifications