KM54 Pro Double Barrel 3-Zone Knifemaking Kiln
KM54 Pro Double Barrel 3-Zone Knifemaking Kiln
Couldn't load pickup availability
Product Information
- Description
- Additional Options
PARAGON KM54 Pro Double Barrel: The Pinnacle of Heat Treating Capacity
When your blades go big and your batches go bigger, the PARAGON KM54 Pro Double Barrel is your uncompromising solution. With a vast 13.25" wide, 5.25" high, and 54" deep chamber, this kiln is purpose-built for high-output knife shops, swordsmiths, and serious professionals demanding space, precision, and fast cycling.
Why Have a Heat Treating Furnace in Your Shop?
A powerful heat treating kiln gives you independence, consistency, and total control. No more sending blades out. No more uncertainty. With the KM54 Pro Double Barrel, you can heat treat, test, tweak, and scale—all from your own workshop, with full visibility over every step of the process.
Why Choose the PARAGON KM54 Pro Double Barrel?
This is the largest model in the KM Pro lineup, featuring every advanced capability you'd expect from a professional-grade kiln—plus a chamber big enough for your most ambitious projects. From multi-blade loads to full-length swords and wide jigs, the KM54 Pro Double Barrel handles it all with ease.
-
Interior chamber: 13.25" W x 5.25" H x 54" D (2.07 cubic feet)
-
3-Zone Temperature Control: Three 14-gauge, exposed-tip thermocouples monitor and control front, center, and rear zones independently
-
Solid-State Relays: Three SSRs with aluminum heat sinks ensure silent, durable, and highly precise performance; includes safety backup
-
2.5” Ceramic Fiber Insulation: Lightweight fiber for fast ramp-up, efficient heat retention, and short cooldown times
-
Surface-Mounted “Wavy” Elements: Spread evenly across the walls for uniform heating and extended element life
-
Guillotine Door: Spring-assisted vertical lift design opens upward and stays out of the way—safe, compact, and ideal for frequent access
-
Heavy-duty steel case with integrated stand: Built for demanding, long-term use
Who is This Furnace For?
The KM54 Pro Double Barrel is ideal for:
-
Swordsmiths working with full-length, wide, or curved blades
-
Knife manufacturers running large or multi-blade batches
-
Professionals using wide jigs, fixtures, or experimenting with advanced steel cycles
-
Industrial users or institutions needing maximum internal volume with precision control
Optional Upgrades
-
Gas Injection Flow Meter: Allows introduction of argon or other inert gas to minimize oxidation and surface scale
-
Add a solenoid valve: Automates gas flow during specific segments for safer, more efficient use
-
Knifemaking Heat Treating Kit: Includes ceramic blade holders, firebrick supports, heat-resistant gloves, and a 31" fork for safe, precise loading
Built with Pride in Mesquite, Texas
The KM54 Pro Double Barrel is the flagship of Paragon’s knifemaking line—handcrafted in Mesquite, Texas, and trusted by bladesmiths who need the most chamber, the best control, and the fastest cycle times. When performance, precision, and volume matter most, this is the kiln to beat.
No specifications available.
Get a Gas Injection Flow Meter (GIFM) and Solenoid Kit
Achieving a clean, scale-free blade finish during heat treatment isn’t just about aesthetics—it’s about quality, consistency, and minimizing post-processing time. The Gas Injection Flow Meter (GIFM) is a trusted tool among professional bladesmiths and heat treaters for precisely that reason.
Minimize Scale, Maximize Results
During high-temperature heat treating, oxygen in the kiln chamber reacts with the steel surface, producing unwanted oxidation scale. Traditionally, this has been mitigated using stainless steel foil wrap—a solution that works, but comes with added cost, time, and waste.
With the GIFM installed, you can introduce an inert gas like argon or nitrogen directly into the firing chamber. This displaces oxygen and significantly reduces oxidation, helping you:
- Eliminate or reduce the need for stainless foil
- Retain sharper blade edges and crisper grind lines
- Improve consistency in finish and minimize cleanup
- Create a cleaner working environment
Precise Control and Automation with the Optional Solenoid Kit
Take control even further with the Solenoid Valve Kit, which works in tandem with the GIFM. This upgrade lets you:
- Automate gas flow by turning it on/off at specific stages of the firing process (per segment)
- Ensure gas is flowing only when needed—saving resources and increasing safety
- Achieve repeatable, precision-controlled atmospheres in your heat treating cycles
Perfect for advanced users and production settings, this upgrade transforms your kiln into a highly efficient and customizable heat treating system.
Trusted by Professionals
This system has been field-proven by bladesmiths, metalworkers, and heat treatment professionals who demand the best finish and tightest process control.
Whether you’re eliminating scale on high-carbon steel or refining your results with stainless alloys, the GIFM with optional solenoid valve gives you an edge—literally and figuratively.
No manuals available.
No wiring diagram available.
No delivery info available.
